GoBe3 Firmware Update

We are happy to announce the new GoBe3 firmware.

It is already available via your HEALBE app and ready to be downloaded and installed. 
We are continuously working on existing features’ update and are paying close 
attention to the feedback we receive from you, so let’s see what we’ve prepared for you in the current update: 

1. Factory reset feature

Look at the HEALBE original USB charging cable and find the small hole near the USB connector, there is a button hidden behind it. Put your GoBe3 on a charger, then press and hold this hidden button for 4 seconds, by doing this you will initiate a factory reset of your GoBe3. It will clean all personal data and reset your smart band to the factory state – as if you’ve just got it out of the box. This feature will be helpful if you’d bought a GoBe3 as a gift, but couldn’t resist trying it before making a present to whom it was meant to.

Turn your favorite music on and explore the area around at any free time, but not earlier than an hour after eating.

2. New UI

In our previous GoBe3 firmware our users had to unlock the device and perform several taps and swipes to dive into the metrics carousel, find the required metric, and only then, finally, one may get the info needed. And in case one needed to look at the same metric after 10 minutes have passed, he/she had to repeat the same sequence, because after 8 minutes the screen state changed back to the Home screen.

We take a feedback from our users seriously and have simplified access to the key-features of our product. From now on the selected metric will always be on your Home screen and there will be no need to search for it in a hidden metrics carousel.

There are now two versions of Home screen: with one or three metrics available simultaneously. Choose the one that suits you via the HEALBE application:

1st Home screen type: ONE ON-SCREEN METRIC

While using this Home screen type, you can look at one detailed metric of your choice:
Energy balance – shows current Energy balance + time of last Meal intake detected
Pulse – shows current Pulse + maximum Pulse value and time it was registered
Activity – shows total duration of one’s Activity per day + step count and distance
Water balance – shows current Hydration level
Stress – shows current Stress level
Sleep quality – shows the Duration of sleep + exact time of awakening

2nd Home screen type: THREE ON-SCREEN METRICS

This Home screen type shows three non-switchable metrics: Energy balance, Pulse, and step count.

The transition to Do Not Disturb and Last notifications screen is done in the same way as for the 1st main screen type.

3. Synchronization alert

Some of our users are so comfortable receiving information directly from GoBe3 that they even forget to synchronize it with the app. To prevent data loss, we will remind you to synchronize by several notifications:
– first reminder – 24 hours after the last synchronization (if there were no synchronizations during this period)
– second, third and fourth reminders – 3 times during the next day (after 32 hours, 40 hours, 48 hours).
– all subsequent reminders – 6 times every day until the synchronization finally happens (every 4 hours: 52, 56, 60, 64, 68, 72, etc.)

All alerts will remain in the notifications’ history.

4. No contact feature

We put a lot of effort into making our algorithms stable even in tricky conditions. We’ve fine-tuned the No contact feature, so after this update alerts will occur much less frequently. At the same time, we remind you that regular cleaning of your smart band’s contact pad is highly important.

Now the first No contact notification will appear in one minute after the skin contact was lost and the frequency of notifications will be limited to one message per five minutes.

5. Localization of the new UI to the Japanese language

6. Fixed some errors in Watch-only mode and the overall stability of different system operation modes has been improved

We hope this update will enhance your GoBe3 experience. And we’re still looking forward to hearing from you.

Wishing you great results with your updated GoBe3 smart band.

Please note that HEALBE GoBe is not responsible for any content that purports to give medical advice or advice regarding fitness training, exercise, or diet. Always seek the advice of a physician or other qualified health provider with any questions you may have regarding a medical condition and prior to starting a diet or physical fitness program.

Join our community to learn how to optimize your health, wellbeing and performance
Fields filled in incorrectly* Your agreement to the privacy policy is required*
Check your email to confirm subscription!