Today we’d like to ask you about your diet.
GoBe3 is designed for a mixed, nutritious diet including carbohydrates, fats, and proteins, according to the recommendations by World Health Organization.
Please note that if you are on an alternative diet, such as the ketogenic or paleo ones, GoBe3 may be less accurate.
However, if your diet incorporates food from a variety of sources, but you still feel that the GoBe3 calculations are not accurate, there is a way to customize GoBe3’s calculations for you through a program called Firmware Calibration. It allows us to configure the firmware of your smart band to determine your indicators more precisely.
To take part in the Firmware Calibration program, you need to wear GoBe3 continuously, while regularly measuring and recording your weight and tracking your diet for two weeks.
Write down all you eat by any means you like: Google Docs, Excel, MyFitnessPal, FatSecret or Yazio, for instant–for two weeks, and then email this data to us at gobe@healbe.com. Our engineers will create a personalized firmware update for your GoBe3 within a few days.
This new firmware will be specially customized to your diet!
How and when should you wear GoBe3?
1. Wear your GoBe3 on the same hand each day.
2. Always tighten the GoBe3 so that the sensor is in maximum contact with your skin.
3. In order to achieve maximum measurement accuracy, you must wear the smart band all the time, including when you sleep. If your GoBe3 is not worn for longer than 100 minutes per day, the measurement will not be accurate.
4. If you need to remove the GoBe3 for any reason:
⦁ Don’t take it off while you eat nor for 3-4 hours after your last meal;
⦁ Put the smart band on again at least 15-30 minutes before your next meal;
⦁ Charge the GoBe3 immediately after you wake up to minimize the time when it is not worn.
この投稿は役に立ちましたか？