Thank you for purchasing the GoBe3 smart band.
Watch our video tutorial or follow the steps below to get your GoBe3 up and running and update its functionality to the latest version. Let’s go!
Installing HEALBE App
In order to start using your GoBe3, please install or update the HEALBE app. Please follow this link to see the steps required to install or update it.
Getting started with HEALBE GoBe3
Before activating your GoBe3 for the first time, peel off the protective film from the band and wipe all external surfaces with a dry cotton pad.
Connect GoBe3 to a power source to turn it on:
1. Carefully pull out the charging socket’s plug located on the rear of the band. Make sure that the HEALBE logo is directed toward the band’s sensors. Сonnect the charging cable to the socket. Push the cable in until it stops;
2. Сonnect the cable to the USB port of your computer or a USB plug adapter and turn on the power source;
3. GoBe3 display will show the charging progress screen;
4. Wait until the GoBe3 display shows the welcome screen with a message that the device is ready to connect to the app.
Before you start using your GoBe3
IMPORTANT! While charging, we strongly recommend downloading the firmware update as this process can take up to 50 minutes.
How to install GoBe updates
• Hold your GoBe3 close to your smartphone
• Enable Bluetooth and connect your smartphone to the internet
• Launch the HEALBE app and log in
• LTap the band icon
at the top-right corner of the home screen (Dashboard)
• Tap “Connect” to connect the app to your GoBe3
• Tap “Install” and wait for the installation end
• Put on the smart band and enjoy using your GoBe3!
この投稿は役に立ちましたか？
HEALBE GoBeが発信するコンテンツは、医療、フィットネストレーニング、エクササイズ、ダイエットに関するアドバイスを目的としたものではございません。健康状態に関する質問がある場合やダイエット、フィットネスプログラムを始める前に、必ず医師またはその他の資格を有する医療従事者の助言を求めてください。