| Thank you for purchasing the GoBe3 smart band. Here are some tips on how to prepare your device for the first use and how to download the GoBe3 updates.Let’s go! Installing HEALBE AppIn order to start using your GoBe3, please install or update the HEALBE app. Please follow this link to see the steps required to install or update it. Getting started with HEALBE GoBe3 |
Before activating your GoBe3 for the first time, peel off the protective film from the band and wipe all external surfaces with a dry cotton pad. Connect GoBe3 to a power source to turn it on: |
Carefully pull out the charging socket’s plug located on the rear of the band. Make sure that the HEALBE logo is directed toward the band’s sensors. Сonnect the charging cable to the socket. Push the cable in until it stops;Сonnect the cable to the USB port of your computer or a USB plug adapter and turn on the power source;GoBe3 display will show the charging progress screen; Wait until the GoBe3 display shows the welcome screen with a message that the device is ready to connect to the app. Before you start using your GoBe3 IMPORTANT!While charging, we strongly recommend downloading the firmware update to ensure the proper operation of the device. This process can take up to 50 minutes. How to install the firmware update • Hold your GoBe3 close to your smartphone;• Download the latest HEALBE GoBe app to your phone;• Launch the app and log in;• Connect the app to your GoBe3.• Follow this short step by step guide to install the updates:Tap the band icon at the top-right corner of the home screen (Dashboard);Tap “Install”;Put on the smart band and enjoy using your GoBe3! Having any questions about your device or the app? значок чата с поддержкой |